Metric bolt size chart
Coarse-pitch metric hex bolts are specified by ISO 262 (pitches), ISO 724 (basic thread diameters), and ISO 4014 or ISO 4017 (hex head). Property class (8.8, 10.9, 12.9) is marked on the head under ISO 898-1 and is not a dimension.
Look up a size
Choose a coarse-thread hex bolt. The tool returns the ISO pitch, basic thread diameters, hex-head dimensions, a usual ~75% tap drill, and the ISO 273 medium clearance hole. These are ISO hex cap/hex bolts, not DIN 571 coach screws.
ISO hex-head dimensions (coarse thread)
| Size | Coarse pitch (mm) | Width across flats s (mm) | Nominal head height k (mm) | Usual 75% tap drill (mm) | ISO 273 medium clearance (mm) |
|---|---|---|---|---|---|
| M6 | 1.00 | 10 | 4.0 | 5.0 | 6.6 |
| M8 | 1.25 | 13 | 5.3 | 6.8 | 9.0 |
| M10 | 1.50 | 16 | 6.4 | 8.5 | 11.0 |
| M12 | 1.75 | 18 | 7.5 | 10.2 | 13.5 |
| M14 | 2.00 | 21 | 8.8 | 12.0 | 15.5 |
| M16 | 2.00 | 24 | 10.0 | 14.0 | 17.5 |
| M20 | 2.50 | 30 | 12.5 | 17.5 | 22.0 |
| M24 | 3.00 | 36 | 15.0 | 21.0 | 26.0 |
Pitches: ISO 262 coarse series. Head s and k: ISO 4014 (partially threaded hex bolts) / ISO 4017 (fully threaded hex cap screws). Clearance holes: ISO 273 medium series. Tap drills are the usual recommended sizes for about 75% engagement (D minus pitch, rounded to the common metric drill). Fine-pitch bolts use a different pitch and a different tap drill; see the metric thread chart.
M10 and M12 hex bolts use 16 mm and 18 mm across flats in this ISO series. UK coach screws to DIN 571 use 17 mm and 19 mm on those diameters — do not pick a socket from the wrong table. Torque estimates for class 8.8 / 10.9 / 12.9 are on the metric bolt torque chart; ISO 898-1 does not itself publish a tightening torque.
Sources
- ISO 262, ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts, coarse (and fine) pitch series.
- ISO 68-1 and ISO 724, ISO general-purpose metric screw threads — Basic profile and Basic dimensions, for major and pitch diameters. Basic pitch diameter is d − 0.64952P.
- ISO 4014 (hexagon head bolts, product grades A and B) and ISO 4017 (hexagon head screws) for width across flats s and nominal head height k.
- ISO 273, Fasteners — Clearance holes for bolts and screws, medium series in the clearance column.
- ISO 898-1 for property-class markings (8.8, 10.9, 12.9). That standard does not specify assembly torque.
Disclaimer: These pages are reference charts and planning tools only. They are not a substitute for the published standard, a manufacturer's installation instructions, or an engineer's specification. Torque figures are advisory estimates, not values prescribed by ISO 898-1. US customary charts and UK-only fixing names are kept on separate pages and are never mixed into the same rule. Bolt Reference does not sell fasteners, inspect joints, or certify assemblies.